ROM Module

Installing a ROM Module

You can install the EPSONScript Level 2 Package (C83229 )
using the same basic steps as those used to install the memory
module.
1. Perform steps 1 through 7 in “Installing a memory module”
section to access the printer’s RAM slots.
2. Make sure the printer has three ROM slots. The right ROM
slot should be already in use. You should install the
EPSONScript board in the center ROM slot.
Note:
The left slot’s usage varies by country.
3. Insert the EPSONScript module all the way into the center
slot.
R
KTWK Rev.B
Reference Guid e
A5 size Chapter 3
’97/12/11 DR, pass 0
Options 3-13