BitImage
With BitImage set to Dark or Light, your printer can correctly
emulate the graphics densities set with the printer commands.
If you select Dark, the bit image density is high. If you select
Light, the bit image density is low.
With BitImage set to BarCode, your printer converts bit
images to bar codes by automatically filling in any vertical gaps
between dots. This produces unbroken vertical l ines that can be
read by a bar code reader. BarCode is not available in I239X
mode.
This mode reduces the size of the image being printed and may
cause some distortion when printing bi t-image graphics.
ZeroChar
This option determines whether the printer prints a slashed
zero (0) or an unslashed zero (0). This feature is useful for
clearly distinguishing between an uppercase letter O and zero
when printing documents such as program lists.
Font
The Font option selects a font by typeface.
The factory default font is Co urier. After selecting the desired
font, you can also adjust the character spacing and size of the
font with the Pitch and Condensed opti ons.
Pitch
You can select a character pitch of 10, 12, or 15 characters per
inch (cpi), or choose proportional spacing.
Alt.Graphics (I239X only)
Turns the Alternate Graphics option on or off. The default
setting is OFF.
LKtwk Rev.B
Reference Guide
A5 size Chapter 5
’97/12/11 DR, pass 0
5-20 Remote Control Panel Utility