FX mode

Printer commands arranged by topic

The following section lists and describes all FX and LQ commands by
topic.

Printer operation

Initialize printer ESC @
Control paper loading/ejecting ESC EM n

Data control

Carriage return CR

Vertical motion

Form feed FF
Set page length in lines ESC C n
Set page length in inches ESC C 0 n
Set skip over perfo ration ESC N n
Cancel skip over perforation ESC O
Line feed LF
Select 1/8-inch line spacing ESC 0
Select 7/72-inch line spacing ESC 1
Select 1/6-inch line spacing ESC 2
Select n/216-inch line spacing ESC 3 n
Perform n/216-inch line spacing ESC J
Tab vertically VT
Set vertical tabs ESC B nn
Note:
Your printer will not print characters beyond one page length (set with the ESC
C or ESC C0 commands), while an FX printer might pr int them.
LKtwk Rev.B
A5 size Appendix C
97/12/10 pass 0
C-12 Command Summary