3. Remove the devel oper cartridge and the photoc onductor
unit as described earlier in this chapter.
4. Remove any dirt inside the printer with a clean cloth. Do not use
compressed air. If you have paper feed problems, clean the
paper roller by opening the roller cover, then clean the
roller.
5. Replace the photoconductor unit, then replace the developer
cartridge.
6. Close the printer cover.
7. Remove all the paper from the paper tray and clean the tray
with a soft cloth.
Removing spilled toner
If toner spills inside the printer, do not use the printer until you
remove all the spilled toner.
60
R
Ktwk rev.C
Reference Guide
A5 size Chapter 6
’97/12/24 DR, pass 0
Troubleshooting and Maintenance 6-35