If you continue to receive this message when printing a
particular page, try simplifying the page by limiting the
number of graphics or reducing the number and size of fonts.
Lower the Print Quality setting to 300 dpi.
You can also add more memory to the printer as described in
chapter 3.
Need Memory
The printer has insufficient memory available for the current
task. Add more memory to your printer.
Paper Jam
Paper is jammed in the paper path. Open the printer cover and
clear the jammed paper as described in the PAPER JAM section
in this chapter. After the jam is cleared, the jammed page’s
print data is automatically reprinted.
Opening the printer cover exposes the fuser, which is marked
by a CAUTION Hot Surface Avoid Contact label. Be careful not
to touch the fuser.
Paper Out
There is no paper in the specified paper source. Load paper of
the indicated size into the source. See your Getting Ready!
booklet or Chapter 1 for instructions on loading paper.
LKtwk rev.C
Reference Guide
A5 size Chapter 6
’97/12/24 DR, pass 0
6-24 Troubleshooting and Maintenance