4. Raise or lower the paper support.
Note:
If you want to print on paper heavier than 90g/m2 (24 lb) or on
special paper (such as envelopes, labels, or transparencies), see
“Printing on Special Paper” on the next page.
Loading paper manually
Follow these steps to load a single sheet of paper from the
manual feed slot:
1. Select Manual Feed as the Paper Source on your printer
driver’s Basic Settings menu.
Note:
If you are printing from a DOS application, use the Remote
Control Panel utility to change the Paper Source setting. For
information on using the Remote Control Panel, see Chapter 5.
2. Make sure that the cover is in place on the paper tray.
51
R
Ktwk Rev.C
Reference Guide
A5 size Chapter 1
’97/12/24 DR, pass 0
Using Your Printer 1-7