Installing the Remote Control Panel utility
To install the utility, follow these steps:
1. Insert the CD-ROM containing the utility into your
computer’s CD-ROM drive.
2. Type RCP_UK\SETUP at the DOS prompt and press Enter.
D:\RCP_UK\SETUP
3. Follow the instructions on the screen to install the utility.
Accessing the Remote Control Panel
To start the Remote Control Panel, type the following at the
DOS prompt and press Enter. (If you changed the default
directory during installation, type that directory instead.)
C:\EPSONRCP\EPRCP
The main Remote Control Panel menu appears.
Select the emulation mode you want to configure and click OK.
main
R
Ktwk Rev.B
Reference Guide
A5 size Chapter 5
’97/12/11 DR, pass 0
Remote Control Panel Utility 5-3