Epson EPL-5700 Network System Requirements , Setting up Your Printer on a Network

Network System Requirements
To use the EPSON Status Monitor in your network syste m,
make sure the IP address for the Ethernet card installed in your
network configuration is as follows.
For Windows 95
Make sure:
ODI driver is not selected as the network interface card
driver.
Microsoft DLC is not installed.
For Windows NT3.51 / NT4.0
Make sure AppleTalk is installed.
For Windows 3.11 for Workgroups
Make sure TCP/IP is installed.
Setting up Your Printer on a Network
Note:
Before reading this section, make sure the EPL-5700 is connected
to the network. For details, ask your network administra tor.
You cannot print over a network using this utility from Windows
3.11 for Workgroups or Windows 3.1.
R
Ktwk rev.B
Reference Guide
A5 size Chapter 4
’97/12/11 DR, pass 0
EPSON Status Monitor Utility 4-5