CG Table (ESCP2, FX only)
Selects the character tables. Character tables contain the
characters and symbols used in different languages. The
printer prints text based on the selected character table.
Code Page (I239X only)
Selects the character tables. Character tables contain the
characters and symbols used in different languages. The
printer prints text based on the selected character table.
Port Selection
Parallel Speed
Specifies the pulse width of the ACKNLG signal on receiving
data. When this option is set to Fast, the pulse width is about
1NS. When this option is set to Normal, the pulse width is
about 10NS.
po
R
Ktwk Rev.B
Reference Guide
A5 size Chapter 5
’97/12/11 DR, pass 0
Remote Control Panel Utility 5- 23