Page Protect
This list lets you use the Page Protect function. This allows you
to allocate additional printer memory for printing data. You
may need to use Page Protect if you are printing a highly
complex page. If a Print Overrun error occurs, change the
setting to ON and reprint your data. This reduces the amount
of memory reserved for receiving data so your computer may
take longer to send the print job, but it will allow you to print
complex jobs. Page Protect usually works best if set to Auto.
You will need to increase your printer’s memory if memory
errors continue to occur.
Note:
Changing the Page Protect setting reconfigures the printer’s memory
which causes any downloaded fonts to be erased.
Resolution
Selects the resolution you want to use for printing. The
available settings are 600 dpi (default) and 300 dpi.
RITech
Allows you to use the RITech (Resolution Improvement
Technology) setting or turn it off. See “Optimizing Print
Quality” on page 2-4 for more information about RITech.
Density
Adjusts the print density to make the printout darker or
lighter. Click the appropriate arrow key to darken or lighten
the output.
R
Ktwk Rev.B
Reference Guide
A5 size Chapter 5
’97/12/11 DR, pass 0
Remote Control Panel Utility 5- 13