Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
108 Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5.1.3 Assign Resources
On this screen, assign each resource to a Resource Domain (hereinafter referred to as a
domain), or change the domain where each resource is being assigned. The target resources
are as follows.
RAID Group
Thin Provisioning Pool
Host World Wide Name
iSCSI Host
Affinity Group
Host Response
Eco-mode Schedule
Conditions in which a RAID Group can Assign to Domain/Change Assigned Domain
A RAID Group in which the LDE is not in progress
A RAID Group that is not registered in the Thin Provisioning Pool
A RAID Group that is not a working RAID Group which is created during the LDE process
(displayed "TMP" for Usage)
A RAID Group that does not include a source or a destination Logical Volume for the RAID
Migration
A RAID Group that does not include Logical Volumes that are concatenated to the volumes in
other RAID Groups
When the Advanced Copy between domains is not allowed, a RAID Group that does not
include a copy source or a copy destination Logical Volume for EC
When the Advanced Copy between domains is not allowed, a RAID Group that does not
include a copy source or a copy destination Logical Volume for OPC (including QuickOPC,
SnapOPC, and SnapOPC+)
A RAID Group that does not include Logical Volumes (except MVV) which are being mapped
(Host-Affinity Settings)
A RAID Group in which no Eco-mode setting is specified
A RAID Group that is not registered as the REC Disk Buffer