Appendix A Screen Details
> A.39 Set RADIUS Authentication
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
814 Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.39 Set RADIUS Authentication

A.39.1 Set RADIUS Authentication (Initial) Screen

On this screen, the RADIUS Authentication information registered in the ETERNUS DX400/
DX8000 series is displayed. When changing settings, specify the appropriate values on this
screen.
RADIUS Authentication Function
Setting item
RADIUS Authentication Function
Select whether to enable or disable the RADIUS Authentication function. The default setting
is "Disable".
-Enable (Use RADIUS Authentication):
RADIUS server for user account authentication is used.
-Disable (Use Internal Authentication):
Internal authentication for user account authentication is used. RADIUS server for user
account authentication is not used.
Common Settings
Setting item
Use LAN Port
Select the device LAN port used for RADIUS Authentication from the list box. The default set-
ting is "USER".
-USER: USER port
-REMCS: REMCS port
Authentication Error Recovery
When "Enable" is selected in the "RADIUS Authentication Function" field, select the desired
operation that will occur if RADIUS Authentication fails from the list box. T he d ef au l t se tt in g i s
"Use Internal Authentication (Any Error Case)".
-Use Internal Authentication (Any Error Case):
When communication with the RADIUS server fails or communic ation with the RADIUS
server succeeds but authentication fails, perform internal authentication.
-Use Internal Authentication (Network Error Case):
When communication with the RADIUS server fails, perform internal authentication.
When "Enable" is selected in the "RADIUS Authentication Function"
field, select the desired operation that will occur if RADIUS
Authentication fails in the "Authentication Error Recovery" of "Common
Settings".