Chapter 9 User Accounts Menu
> 9.1 Account
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
655 Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
9.1.2 Set Role
This function sets the role to be added for the user account. Allocate usable functions and opera-
tion target Resource Domains to the role. Up to 24 roles can be registered in the ETERNUS
DX400/DX8000 series.
This section explains role setting procedures.
The following settings are available.
Register Role
Change Role
Delete Role
Procedures for each operation are described below.
The [Set Role] function can allocate only system administrator functions
(*1) to the role.
*1: System administrator functions are the functions that can be used when
logged on with a system administrator (root) account.
Roles (categories) for the user account which is currently accessing the
ETERNUSmgr can be changed. However, the changed role is reflected
at the next logon.
The roles that have already been allocated to a user account cannot
change the Resource Domain.
The roles that have already been allocated to a user account cannot be
deleted.
When Resource Domains are registered in the ETERNUS DX400/
DX8000 series, Resource Domains that can be set for roles differ
depending on the current user account.
-When logged on using a Total Administrator account, the Resource
Domain to be set for the role can be selected from all the Resource
Domains including "All Resources".
-When logged on using a Resource Domain Administrator account, a
Resource Domain to be set for the role cannot be selected, and the
Resource Domain of the current user account is set for the role.
There are six default roles besides roles specified in this function.
Default roles cannot be changed. Refer to "Default roles and supported
categories" (page 813) for details about functions available for default
roles. Note that the default roles cannot be used when logged on using
a Resource Domain Administrator account.
Use the [Set User Account] function to add roles for a user account.