Chapter 6 Settings Menu
> 6.6 Remote Advanced Copy Configuration
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
564 Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
For ETERNUS6000
Select [RA Type] from the list box, specify the port mode (Initiator/Target) using the radio
button, and click the [Set] button.
The [Create Advanced Copy Information (Set Device)] screen, which has been
updated, appears again.
For ETERNUS DX410/DX440, ETERNUS DX8100/DX8400/DX8700, ETERNUS4000,
and ETERNUS8000
(1)Select [RA Type] from the list box, and click the [Set] button.
(2)Click the [Set Detail] link and set detailed settings for each CA.
The [Create Advanced Copy Information (RA Setting)] screen appears.
The screen differs depending on the selected [RA Type].
----
[Set Detail] link is not displayed.
-FC 1-Port
-FC 2-Port
-FC 4-Port
When the [FC 2-Port] is selected as the [RA Type], the [port#0] and
[port#1] becomes available.