Chapter 5 Configuration Menu
> 5.3 Thin Provisioning Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
266 Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5.3.2 Set Thin Provisioning Pool Parameters
This function sets the thresholds for notification of a Thin Provisioning Pool shortage. There are
two thresholds for Thin Provisioning Pools: Caution and Warning.
This section describes how to set the Thin Provisioning Pool parameters.
Procedure
1Click [Set Thin Provisioning Pool Parameters] under the Thin Provisioning
Management in the [Configuration] menu.
The [Set Thin Provisioning Parameters (Notification Setting)] screen appears.
Refer to "A.14.1 Set Thin Provisioning Pool Parameters (Notification Setting) Screen"
(page 735) for screen details.
When there are no Thin Provisioning Pools registered in the ETERNUS
DX400/DX8000 series, the [Set Thin Provisioning Pool Parameters]
function cannot be executed.
When Resource Domains are registered in the ETERNUS DX400/
DX8000 series, Thin Provisioning Pools to which the thresholds can be
set differ depending on the current user account.
-When logged on using a Total Administrator account, the thresholds
of all the Thin Provisioning Pools that are assigned to Resource
Domains can be set.
-When logged on using a Resource Domain Administrator account,
the thresholds of only the Thin Provisioning Pools that are assigned
to the relevant Resource Domain and the Shared Resource can be
set.
The following two methods are available for notification of a Thin
Provisioning Pool shortage.
-SNMP Trap
-ETERNUS SF Storage Cruiser
If "Caution" or "Warning" is displayed in the status field of notification,
immediately expand disk drives.
If the thresholds of a Thin Provisioning Pool cannot be specified, a
message to that effect is displayed. Click the [OK] button to return to
the [Menu] screen.