Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
122 Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3Change the Assigned Domain of the Host World Wide Name, and click the [Set]
button.
The "Host Table information (Host Table number and Host Table name (if the name is
registered))" for the relevant Host World Wide Name is displayed in the Host World Wide
Name List.
To set using [Set Range]
(1)Enter the first and last Host Table numbers.
(2)Select the domain to assign the specified range of the Host Tables from the list box.
(3)Click the [Execute] button.
(This screen is displayed when logged on the ETERNUS DX400/DX8000 series in
which the Resource Domains are registered using a Total Administrator account.)
If the [Execute] button is clicked in the following conditions, an error
screen appears.
Both or one of the "From: Host Table#" or "To: Host Table#" field
is blank
Characters other than hexadecimal numbers are specified in the
"From: Host Table#" or "To: Host Table#" field
There are no Host World Wide Names where the Assigned
Domain can be changed in the range specified by the "From:
Host Table#" and "To: Host Table#"
The Set Range setting is performed when there is at least one Host
World Wide Name that satisfies the condition described in "Condition
in which a Host World Wide Name can Assign to Domain/Change
Assigned Domain" (page 109).