Appendix A Screen Details
> A.20 Set iSCSI Host
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
759 Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
A.20 Set iSCSI Host

A.20.1 Set iSCSI Host (Add) Screen

On this screen, the detailed setting for the iSCSI information to be added in the device is per-
formed.
Add Host iSCSI
Setting item
Name
In the text box, enter the name to assign for the Host Table up to 16 characters in ASCII code
(0x20 0x7E). Host Table name can be omitted.
Resource Domain
Select Resource Domain to assign the iSCSI Hosts from the list box.
Shared Resources (Share) and Resource Domains (0x00 – 0x07) registered in the
ETERNUS DX400/DX8000 series are displayed as the selection items in the list box. If a
Resource Domain name has been registered, the Resource Domain name is also displayed.
The default setting is "Share".
iSCSI Name
iSCSI Name of the iSCSI Host port is set. (required)
Alphanumeric characters from 1 to 223, [-] (hyphen), [:] (colon), [.] (period) can be used.
IP Address
IP address of the iSCSI Host port is set (can be omitted).
Numeric characters from 1 to 3 (the first part: 1 to 255, others: 0 to 255) can be ent e r e d i n al l
text boxes.
The same Host Table name as for the existing LAN card cannot be
specified.
When Resource Domains are not registered, or when logged on using a
Resource Domain Administrator account, the "Resource Domain" item
is not displayed.
The iSCSI name is a unique name in the device. The same iSCSI name
cannot be set for multiple iSCSI Host Ports.
IP Address is a unique network address in the subnet where the
device and the host connect. The same IP addresses cannot be set
in the device.
Only one iSCSI Host without an IP address setting can be specified
per iSCSI name.