Appendix A Screen Details
> A.6 Advanced Copy Status
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
699 Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
Recovery Mode
The recovery mode of the session is displayed.
-Automatic: A mode to restart copying automatically when the REC copy path has
recovered from abnormal status.
-Manual: A mode not to restart copying automatically when the REC copy path has
recovered from abnormal status.
Split Mode
The split mode of the relevant session is displayed.
-Automatic: A mode in which Write I/O accesses to copy source are accepted when the
copy path of REC is in abnormal status.
-Manual: A mode in which Write I/O accesses to copy source are not accepted when the
copy path of REC is in abnormal status. Specified sense information is sent to the host.
Remote Box ID
The identifier of another device which is remotely connected with this device is displayed.
Extent Information
Displayed contents
Offset
A copy number in specified range is displayed in 0 – 2048 (decimal number).
Source LBA
The copy source Start LBA (Logical Block Address) in the specified range is displayed in 16-
digit hexadecimal.
Destination LBA
The copy destination Start LBA (Logical Block Address) in the specified range is displayed in
16-digit hexadecimal.
Extent Block
The number of data blocks in the specified copy range is displayed in decimal.
Units for each volume type are as follows:
-Open Volume: Block
-Mainframe Volume: Track
A.6.6 Advanced Copy Status (Advanced Copy Path Status) Screen
This screen displays the status of the path between the local and the selected remote devices.
Box ID Information
Displayed contents
Local Box ID
Displays the Box ID of this device.
Remote Box ID
The Box ID of the selected remote device is displayed.