Chapter 5 Configuration Menu
> 5.3 Thin Provisioning Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
298 Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
5.3.19 Register Thin Provisioning License
The Thin Provisioning License can be registered in the ETERNUS DX400/DX8000 series.
Thin Provisioning is an optional function offered for the ETERNUS DX400/DX8000 series. It i s
necessary to buy a license to use Thin Provisioning. By purchasing this license, the "License
Label" can be obtained.
The license information on the label can be registered to the ETERNUS DX400/DX8000 series
using the [Register Thin Provisioning License] function. When this registration is completed suc-
cessfully, the customer can use the Thin Provisioning function.
This section describes how to register the Thin Provisioning License.
Procedure
1Click [Register Thin Provisioning License] under the Thin Provisioning
Management in the [Configuration] menu.
The [Register Thin Provisioning License (Initial)] screen appears.
2In order to register the Thin Provisioning License, set the following items and
click the [Set] button.
MODEL
Enter the MODEL (Model Name) of the license number.
SER No.
Enter the SER No. (Serial Number) of the license number.
CC
Enter the CC (Check Code) of the license number.
When the [Register Thin Provisioning License (Updating Configuration Information)]
screen appears and the operation completes successfully, the [Register Thin
Provisioning License (Setting Result)] screen appears.
If the "Thin Provisioning License" is not registered, the Thin Provisioning
function is not available.
When the license has already been registered, a message to that
effect is displayed. Click the [OK] button to retu rn to t he [ Menu ]
screen.