Chapter 5 Configuration Menu
> 5.1 Resource Domain Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
138 Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
6Click the [Menu] button.
Returns to the [Menu] screen.
End of procedure

5.1.3.7 Assigning Eco-mode Schedule

This section explains Assigning Eco-mode schedule settings.
Procedure
1Click [Assign Resources] under the Resource Domain Management in the
[Configuration] menu.
The [Assign Resources (Select Resource)] screen appears.
2Click the [Eco-mode Schedule] link.
(This screen is displayed when logged on the ETERNUS DX400/DX8000 series in which
the Resource Domains are registered using a Total Administrator account.)
The [Assign Resources (Set Eco-mode Schedule)] screen appears.
Refer to "A.9.7 Assign Resources (Set Eco-mode Schedule) Screen" (page 714) for
screen details.
If setting the CA parameters, click the [Set CA Parameters] link.
If setting the Host World Wide Name, click the [Set Host
WorldWideName(s)] link.
If changing the domain of the Host World Wide Name, click the
[Assign Resource Domain (Host World Wide Name)] link.
If setting the iSCSI Host, click the [Set iSCSI Host] link.
If changing the domain of the iSCSI Host, click the [Assign
Resource Domain (iSCSI Host)] link.
If logged on using a user account that does not support any of the
"RAID Group Settings - Change", "Host Settings - Open", and "Eco-
mode", the [Suppress Function] screen appears. Click the [OK]
button to return to the [Menu] screen.