Chapter 5 Configuration Menu
> 5.3 Thin Provisioning Management
ETERNUS DX400/DX8000 series ETERNUSmgr User Guide Settings/Maintenance
294 Copyright 2010 FUJITSU LIMITED
P2X0-0760-02ENZ0
3Click the [Menu] button.
Returns to the [Menu] screen.
End of procedure

5.3.13.2 Stopping a Balancing TPV

Procedure
1Click [Progress of Balance Thin Provisioning Volume] under the Thin

Provisioning Management in the [Configuration] menu.

The [Progress of Balance Thin Provisioning Volume (Initial)] screen appears.
2Select which balancing TPV session to delete, and click the [Delete] button.
The status of any balancing TPV can be selected as a target for deletion.
The [Progress of Balance Thin Provisioning Volume (Deletion Check)] screen appears.
In order to recover normal status (the status before failure), the
configuration information of the ETERNUS DX400/DX8000 series
may be needed. After balancing of all the TPVs have completed, use
the [Export Configuration] function to export the configuration
information.
When the ETERNUS DX400/DX8000 series is busy (retrieving
progress data) or no balancing of a TPV is in progress, a message to
that effect is displayed without showing the initial screen.
When the status is busy, wait until processing is done. When the
progress data is retrieved, the [Progress of Balance Thin
Provisioning Volume (Initial)] screen appears.
When no balancing of TPV is in progress, click the [OK] button to
return to the [Menu] screen.
When the [Delete] button is clicked without selecting a balancing
TPV session to delete, an error screen appears.