Chapter 3 Web Operation
After the completion of the settings, click the 
button. The message below appears. Click OK to apply the settings. * Reboot is not required.
Table 3-28 Decoder Setting Items
| Item | Description | Parameter |
Input | IP version | Specify the IP version for IP | - IPv4 (Default) |
interface |
| streaming. | - IPv6 |
settings |
|
|
|
(Decoder |
|
|
|
ethernet) |
|
|
|
|
|
|
|
| Streaming mode | Specify the type of broadcasting for | - Multicast (Default) |
|
| IP streaming. | - Unicast |
|
|
|
|
| Streaming origination | If "Unicast" is specified for | IP address |
| IP address | [Streaming mode], specify the IP | (Default: 230.11.3.1) |
|
| address of the streaming origination | Setting the following values is inhibited: |
|
| device. If "Multicast" is specified | [IPv4] |
|
| for [Streaming mode], specify the | 240.0.0.0 to 255.255.255.255 (Class E) |
|
| multicast address for streaming. | 0.0.0.0, 127.0.0.0 to 127.255.255.255 |
|
|
| [IPv6] |
|
|
| 0::0 |
| MLD version | If "IPv6" is specified for [IP version] | - Version 1 (Default) |
|
| and "Multicast" is specified for | - Version 2 |
|
| [Streaming mode], specify the MLD |
|
|
| version of the MLD to be used for |
|
|
| the group management of IPv6 |
|
|
| multicast. |
|
| MLDv2 source IP | If "Version 2" is set for [MLD | IPv6 address that is not the following: |
| address | Version], specify the IPv6 address of | ffxx:xxxx:…:xxxx (multicast address) |
|
| the IPv6 multicast origination device | (Default: "::") |
|
| that accepts receiving. | * If this address does not match the |
|
|
| origination IPv6 address of IPv6 |
|
|
| multicast, streams cannot be received. |
| Unicast request cycle | Specify the cycle at which the | - 3 to 30 seconds |
|
| unicast stream request is sent. | (Default: 30 seconds) |
| ID control for unicast | If "Unicast" is specified for | - Enable |
|
| [Streaming mode], specify whether | - Disable (Default) |
|
| to report the ID for confirming the | * If "Enable" is selected, the unicast ID |
|
| validity of the unicast stream | of the encoder and that of the decoder |
|
| request. | must be in agreement to receive streams. |
| Unicast ID | If "Enable" is selected for [ID | Hexadecimal number between 0000 and |
|
| control for unicast], specify the ID to | ffff |
|
| be used for confirming the validity |
|
|
| of a unicast streaming request. |
|
| ARQ | If "Enable" is selected for [ID | - Enable |
|
| control for unicast], specify a valid | - Disable (Default) |
|
| ID value. |
|
