Fujitsu V01 manual 115

			Chapter 4 Troubleshooting
Code	Name	Description	Details (The part after the * mark is not displayed.)
I002	HDMI input down	HDMI input signal not detected	－
*I002	HDMI input down recovery	Normal HDMI input	－
I003	Analog input down	Analog video input signal not detected	－
*I003	Analog input down recovery	Normal analog video input	－
I011	Video input synchronization error	Video input PLL synchronization error	－
		occurred
*I011	Video input synchronization error	Recovered from video input PLL	－
	recovery	synchronization error
I021	Input data error (*8)	Count-up occurred in the performance	#xxxxxxxxxxxxxxxx
		statistics error counter	* 64-bit hexadecimal number. For the meaning of each
			bit, see Table 3-12, "Input data error bit format".
*I021	Input data error recovery (*8)	Recovered from count-up of the	－
		performance statistics error counter
E001	Power error (*1)	Power failure occurred	#1 * Power failure on CNT board
			#2 * Power failure on COD board
E003	Temperature error occurrence (*5)	Extreme temperature (shutdown processing	* Details are as follows:
		started)	#1/#2: Number of the temperature sensor that has
			detected a temperature error
			t1: Temperature indicated by temperature sensor 1
			t2: Temperature indicated by temperature sensor 2
			xxx: FAN rotational speed
E004	Flash ROM error (*1)	Internal flash ROM access error occurred	/dev/mtd0 to 15
			* Displays the occurrence range of access error.
E00A	Flash ROM check sum error (*1)	Operation data error detected in internal	Software
		Flash ROM	bundle software
			configuration
			configuration#1～#10
			* Displays the occurrence range of check sum errors.
E010	FAN error (*2)	FAN error (low speed) or stopped	xxxRPS * xxx: FAN rotational speed
*E010	FAN error recovery (*2)	FAN speed recovery	xxxRPS * xxx: FAN rotational speed

IP-900 Series

115