Manuals / Fujitsu / Computer Equipment / Network Hardware

Fujitsu V01 manual Operation Modes, Operation mode Description

Models: V01

1 138

Download 138 pages 23.38 Kb

Page 44

Chapter 3 Web Operation

	Item			Description				Parameter
	Delimiter code 1	Specify	the	delimiter	code	1	for	Blank or hexadecimal number between
		RS-232C.						00 and ff
								(Default: Blank)
								* A blank field means that no value is
								specified.
	Delimiter code 2	Specify	the	delimiter	code	2	for	Blank or hexadecimal number between
		RS-232C.						00 and ff
								(Default: Blank)
								* A blank field means that no value is
								specified.
	Baud rate	Specify the RS-232C communication						1200/2400/4800/9600 (Default)
		speed.						/19200/38400 bps

	Bit length	Specify the RS-232C character size.						7 bits or 8 bits (Default)
	Parity	Specify whether to use RS-232C						None (Default), Odd or Even
		parity.
	Stop bits	Specify the length of RS-232C stop						1 bit (Default) or 2 bits
		bits.
	Flow control	Specify whether to set RS-232C flow						None (Default), RS or CS
		control.

Table 3-8 Operation Modes

Operation mode

Description

(1)		Bidirectional data communication is performed between the data port and
	TCP server mode	another device connected via the IP network. IP-900 series waits, at the
	(bidirectional)	specified port number, for access through socket connection from the
		destination device. (IP address setting is not required.)
(2)		Data received from another device connected via the IP network is output to
	TCP server mode	the data port. Data received from the data port is not sent to the destination.
	(receiving only)	IP-900 series waits, at the specified port number, for access through socket
		connection from the destination device. (IP address setting is not required.)
(3)		Bidirectional data communication is performed between the data port and
	TCP client mode	another device connected via the IP network. IP-900 series sets up a socket
	(bidirectional)	connection through the specified port to the device with the specified IP
		address.

*The following combinations of modes are available for data communication between IP-900 series:

(1)<-> (3)

(2)<-> (3)

IP-900 Series

38

Image 44

Fujitsu V01 manual Operation Modes, Operation mode Description

Contents

Software Using IP-900 Series Safely Handling of This ManualPreface Product Use EnvironmentAlert Indications Alert Indication in This ManualMaintenance Contents Troubleshooting 107 Appendixes 119Chapter Main Features IP-900E SpecificationsSpecification PPS IDIP-900 Series UDP, RTP CF cards are separately sold options IP-900D/IP-900IID Specifications System configuration example SNG Typical Application ExamplesInstallation & Operation Installation & OperationInstallation Procedure Updating the SoftwareIP-900 Series Installing an HD Option License Label at the bottom of the IP-900E exampleIP-900 series Web page example Option License Installation Equipment Operation Operation through Web ScreenCase of failure in automatic acquisition of an IP address Forcibly changing to the fixed IP address from DHCP, PPPoEPowering off on PPPoE connection Chapter Web OperationLogin Starting UpIP-900E Software Window Example IP-900D/IP-900IID Software Window Example If the Screen is Not Accessible Common Menu Configuration DataParameters Preprogrammed in Configuration Data Setting Recorder Setting decoderEncoder Address Report SuperimposeSelecting Configuration Data Configuration Data WindowRegistering configuration data Selecting Configuration DataConfiguration Data 10 independent sets Using configuration data Configuration Data Selection Items Description ParameterCopying Configuration Data Copy Configuration WindowCopy Configuration Setting Items Basic Basic Information WindowDhcp Basic Setting ItemsLAN Description Time Zone & Time Server Time Zone & Time Server WindowTime Zone Setting Item Time Server Setting ItemsData Port 10 Data Port WindowData Port Setting Items Operation mode Description Operation ModesSnmp 11 Snmp WindowSnmp Setting Items Operation & Status Common 12 Operation & Status Window10 Operation & Status Display Items Normal/Fault BidirectionalIP address Port numberAlarm 13 Alarm Window11 Alarm List IP-900 Series 12 Input data error bit format 10 Log 14 Log Window13 Log Type Txfd IP-900 Series IP-900 Series IP-900 Series IP-900 Series Performance Statistics 15 Performance Statistics Window Main Encoder16 Performance Statistics Window Sub-encoder 17 Performance Statistics Window Decoder 18 Performance Statistics Window Data Port 14 Performance Statistics Items Port DescriptionAAC Port Description Display｛-----｝ IP-900 Series Date & Time 19 Date & Time WindowSoftware Management 20 Software Management WindowRestore Backup15 Software Management Items Delete ALLReboot Setting Encoder Encoder21 Settings Screen Encoder 16 Encoder Setting Items HdmiValues available when Video input is FEC ARQTOS UDPDescription Unicast Description Parameter Setting Range Setting SummaryMain Encoder /Sub encoder System Bit RateEncoder HD/SD & Sub encoder HD/SD Audio Setting SummaryEncoder SD Video Setting Summary Null Light Medium HeavyResolution None None 352x576 video resolution and Table Sub encoder SD Video Setting Summary176x144 video resolution SubOn the Audio format setting MPEG2-TS Null 17 Main encoder /Sub encoder System Bit Rate Setting Range 18 Main encoder HD / Sub encoder HD Video Setting Summary Ibbp Ippp Pppp19 Main encoder SD Video Setting Summary Ibbp Ippp PpppMPEG2 AAC Encoder Address Report 22 Encoder Address Report Window23 Setting Items for Encoder Address Report IP-900 Series Superimpose 23 Superimpose Window24 Main encoder/Sub encoder superimpose settings IP-900 Series Operation & Status Encoder 24 Operation & Status Encoder WindowDestination IP address Port number Normal / Fault Normal / Fault / No video signal25 Encoder Operation & Status Display Items Operating / StoppedSetting Recorder Recorder26 Recorder Setting Items File List 26 File List WindowIP-900 Series Operation & Status Recorder 27 Operation & Status Recorder27 Recorder Operation & Status Display Items Recording / Stopped ｝Decoder Setting Decoder28 Decoder Setting Items 28 Decoder Setting Items 100101 102 Encoder Selection 103Streaming / Number of possible streams x / Stopped 29 Encoder Selection Items104 Operation & Status Decoder 10530 Decoder Operation & Status Display Items 106TroubleshootingChapter 107Troubleshooting Classification Symptom Check Corrective actionCheck Items and Corrective Action 108109 110 Alarm LED Goes On Alarm Codes and Corrective Action111 CodeAlarm Code List 112113 114 115 116 117 Alarm LED Detail 118Appendixes Appendixes 119120 121 122 123 124 125 126 127 128 422129 Case of failure in automatic130