Fujitsu V01 manual Null, Light Medium Heavy

Chapter 3 Web Operation

Item			Description
	PPS interval		If "SD" is specified for [Video
	- SD -		resolution],		specify		the	PPS
			interval for video encoding.
	PPS ID		If "SD" is specified for [Video
	- SD -		resolution], specify the PPS ID
			mode for video encoding.
	Pre-filter		If "SD" is specified for [Video
	- SD -		resolution], specify the strength of
			the pre-filter.
	Refresh cycle		If "SD" is specified for [Video
	- SD -		resolution],		specify		the	refresh
			cycle.
			* The contents that can be selected
			depend on the [Video format] and
			[Encoding control mode] settings.
	Audio format		If "SD" is specified for [Video
	- SD -		resolution],		specify		the	audio
			encoding format.
	Audio bit rate		If "SD" is specified for [Video
	- SD -		resolution], specify the audio bit
			rate.
			* The contents that can be set
			depend on the [Audio format]
			setting.
	PSI	insertion	If "SD" is specified for [Video
	interval		resolution], specify the PAT and
	- SD -		PMT insertion intervals.
	Padded data pattern		Specify the padded data pattern
			used in video encoding data.
			* If "IP satellite mode" is specified,
			video encoding data is padded with
			NULL	packets.		Therefore, the
			percentage of NULL packets in a
			distributed stream increases.
Sub encoder	Encoding operation		Specify whether to start encoding
settings			operation after the device is started
(Encode)			or after the sub encoder settings are
			changed.
	Downconverter		If "HD" is specified for [Video
			resolution] and a setting other than
			"1080i/60" is specified for [Video
			format],	specify		the	conversion
			mode used for down-converting
			HD video to SD video.
	Bit rate mode		Specify how the bit rate is
			specified.
	System bit rate		If "HD" is specified for [Video
	- HD -		resolution], "None" is specified for
			[Downconverter], and "System bit
			rate" is specified for [Bit rate
			mode], specify the system bit rate
			of the stream to be distributed.

Parameter

-GOP (Default)

-Picture

-Fixed (Default)

-Adaptive

-OFF (Default)

-LIGHT

-MEDIUM

-HEAVY

For setting values, see Table 3-19 Main encoder SD: Video Setting Summary

-MPEG1 layer 2 (Default)

-MPEG2 AAC

-No audio

For setting values, see Table 3-22 Main encoder HD/SD & Sub encoder HD/SD: Audio Setting Summary

-100 to 1000 ms (Default: 100 ms)

* Setting can be made in units of 100 ms.

-Normal (Default)

-IP satellite mode

-Enable

-Disable (Default)

-None (Default)

-Letter box

-Side cropped

-Video bit rate (Default)

-System bit rate

For setting values, see Table 3-17 Main encoder /Sub encoder System Bit Rate Setting Range

IP-900 Series

75