Fujitsu V01 manual None

Chapter 3 Web Operation

Item			Description
	PPS interval		If "HD" is specified for [Video
	- HD -		resolution]		and	"None"	is
			specified	for	[Downconverter],
			specify the PPS interval for video
			encoding.
	PPS ID		If "HD" is specified for [Video
	- HD -		resolution]		and	"None"	is
			specified	for	[Downconverter],
			specify the PPS ID mode for video
			encoding.
	Pre-filter		If "HD" is specified for [Video
	- HD -		resolution] and "None" is specified
			for [Downconverter], specify				the
			strength of the pre-filter.
	Refresh cycle		If "HD" is specified for [Video
	- HD -		resolution]		and	"None"	is
			specified	for	[Downconverter],
			specify the refresh cycle.
			* The contents that can be selected
			depend on the [Video format] and
			[Encoding control mode] settings.
	Audio format		If "HD" is specified for [Video
	- HD -		resolution] and "None" is specified
			for [Downconverter], specify				the
			audio encoding format.
	Audio bit rate		If "HD" is specified for [Video
	- HD -		resolution] and "None" is specified
			for [Downconverter], specify				the
			audio bit rate.
	PSI	insertion	If "HD" is specified for [Video
	interval		resolution] and "None" is specified
	- HD -		for [Downconverter], specify				the
			PAT and PMT insertion intervals.
	System bit rate		If "SD" is specified for [Video
	- SD -		resolution], "Letter box" or "Side
			cropped"	is		specified	for
			[Downconverter], and "System bit
			rate" is specified for [Bit rate
			mode], specify the system bit rate
			of the stream to be distributed.
	Video resolution		If "SD" is specified for [Video
	- SD -		resolution] and "Letter box" or
			"Side cropped" is specified for
			[Downconverter],			specify	the
			resolution of the video to be
			encoded.
			* The contents that can be set
			depend on the [Video format]
			setting.

Parameter

-GOP (Default)

-Picture

-Fixed (Default)

-Adaptive

-OFF (Default)

-LIGHT

-MEDIUM

-HEAVY

For setting values, see Table 3-18 Main encoder HD / Sub encoder HD: Video Setting Summary

-MPEG1 layer 2 (Default)

-MPEG2 AAC

-No audio

For setting values, see Table 3-22 Main encoder HD/SD & Sub encoder HD/SD: Audio Setting Summary

-100 to 1000 ms (Default: 100 ms)

* Setting can be made in units of 100 ms.

For setting values, see Table 3-17 Main encoder /Sub encoder System Bit Rate Setting Range

For setting values, see Table 3-20 Sub encoder SD: Video Setting Summary (in case of 720x480, 352x480, 720x576 and 352x576 video resolution) and Table 3-21

Sub encoder SD: Video Setting Summary (in case of 352x240, 176x112, 352x288, 176x144 video resolution)

IP-900 Series

77