Udp, Rtp | Fujitsu V01 instruction

						Chapter 1 Before Using This Product

		Item				Specification
		Bit rate				720 x 480 (59.94Hz input): 1 to 10Mbps
						352 x 480 (59.94Hz input): 500Kbps to 10Mbps
						352 x 240 (59.94Hz input): 50 to 512Kbps
						176 x 112 (59.94Hz input): 25 to 50Kbps
						720 x 576 (50Hz input): 1 to 10Mbps
						352 x 576 (50Hz input): 500Kbps to 10Mbps
						352 x 288 (50Hz input): 50 to 512Kbps
						176 x 144 (50Hz input): 25 to 50Kbps
		Video PES				“1Field/1PES” / “1Frame/1PES” selectable

		Profile selection				Either High profile or Main profile can be selected.

		PPS interval				GOP/Picture selectable

		PPS ID				Fixed/Adaptive selectable

		Encoding		control		Standard (IBBP), Low latency (IPPP), or Low latency (PPPP) can be selected.
		mode				* Can be selected when the encoding resolution is 720 x 480, 720 x 576, 352 x
						480, or 352 x 576.
		Pre-filter				HEAVY, MEDIUM, LIGHT, or OFF can be selected.
						* Can be selected when the encoding resolution is 720 x 480, 720 x 576, 352 x
						480, or 352 x 576.
		Refresh cycle				Selection can be made in three stages.
						* Can be selected when the encoding resolution is 720 x 480, 720 x 576, 352 x
						480, or 352 x 576.
		Interfaces				Input: HD/SD-SDI, HDMI (HDCP not supported), and analog video
	Main	Encoding format				MPEG-1 Audio layer 2 (stereo)
	audio					MPEG-2 AAC (stereo)
		Sampling				48 kHz
		frequency
		Bit	rate	(for	2	MPEG-1 Audio layer 2: 128/256/384 kbps
		channels)				MPEG-2 AAC: 64/128/256 kbps
		Number			of	2
		channels
		Interfaces				Input: HD/SD-SDI (embedded) - Up to 2 channels
						HDMI - Up to 2 channels
						Analog (unbalanced): - Up to 2 channels
						Output: None
	Sub audio	Encoding format				MPEG-1 Audio layer 2 (stereo)
						MPEG-2 AAC (stereo)

		Sampling				48 kHz
		frequency
		Bit	rate	(for	2	MPEG-1 Audio layer 2: 128/256/384 kbps
		channels)				MPEG-2 AAC: 64/128/256 kbps
		Number			of	2
		channels
		Interfaces				Input: HD/SD-SDI (embedded) - Up to 2 channels
						HDMI - Up to 2 channels
						Analog (unbalanced) - Up to 2 channels
						Output: None
	Multiplexing	method				MPEG-2 TS with time stamp, MPEG-2 TS
	Error correction					FEC, ARQ, Pro-MPEG FEC
	Transport protocol					UDP, RTP
	Network interface					10 BASE-T/100 BASE-TX (PPPoE built in)
						1 port
						IP-900 Series

5

Image 11

Fujitsu V01 manual Udp, Rtp

Contents

Software Handling of This Manual Using IP-900 Series Safely Product Use Environment Preface Alert Indication in This Manual Alert Indications Maintenance Contents Appendixes 119 Troubleshooting 107 Chapter PPS ID Main FeaturesIP-900E Specifications Specification IP-900 Series UDP, RTP CF cards are separately sold options IP-900D/IP-900IID Specifications Typical Application Examples System configuration example SNG Installation & Operation Installation & Operation Updating the Software Installation Procedure IP-900 Series Label at the bottom of the IP-900E example Installing an HD Option License IP-900 series Web page example Option License Installation Forcibly changing to the fixed IP address from DHCP, PPPoE Equipment OperationOperation through Web Screen Case of failure in automatic acquisition of an IP address Powering off on PPPoE connection Web Operation Chapter Starting Up Login IP-900E Software Window Example IP-900D/IP-900IID Software Window Example If the Screen is Not Accessible Common Menu Configuration DataParameters Preprogrammed in Configuration Data Superimpose Setting RecorderSetting decoder Encoder Address Report Configuration Data Window Selecting Configuration Data Selecting Configuration Data Registering configuration data Configuration Data 10 independent sets Using configuration data Description Parameter Configuration Data Selection Items Copy Configuration Window Copying Configuration Data Copy Configuration Setting Items Basic Information Window Basic Dhcp Basic Setting ItemsLAN Description Time Zone & Time Server Window Time Zone & Time Server Time Server Setting Items Time Zone Setting Item 10 Data Port Window Data Port Data Port Setting Items Operation Modes Operation mode Description 11 Snmp Window Snmp Snmp Setting Items 12 Operation & Status Window Operation & Status Common 10 Operation & Status Display Items Port number Normal/FaultBidirectional IP address 13 Alarm Window Alarm 11 Alarm List IP-900 Series 12 Input data error bit format 14 Log Window 10 Log 13 Log Type Txfd IP-900 Series IP-900 Series IP-900 Series IP-900 Series 15 Performance Statistics Window Main Encoder Performance Statistics 16 Performance Statistics Window Sub-encoder 17 Performance Statistics Window Decoder 18 Performance Statistics Window Data Port Port Description 14 Performance Statistics Items AAC Port Description Display｛-----｝ IP-900 Series 19 Date & Time Window Date & Time 20 Software Management Window Software Management Delete ALL RestoreBackup 15 Software Management Items Reboot Encoder Setting Encoder 21 Settings Screen Encoder Hdmi 16 Encoder Setting Items Values available when Video input is UDP FECARQ TOS Description Unicast Description Parameter Encoder /Sub encoder System Bit Rate Setting RangeSetting Summary Main Encoder HD/SD & Sub encoder HD/SD Audio Setting SummaryEncoder SD Video Setting Summary Light Medium Heavy Null Resolution None None Sub 352x576 video resolution and TableSub encoder SD Video Setting Summary 176x144 video resolution On the Audio format setting MPEG2-TS Null 17 Main encoder /Sub encoder System Bit Rate Setting Range Ibbp Ippp Pppp 18 Main encoder HD / Sub encoder HD Video Setting Summary Ibbp Ippp Pppp 19 Main encoder SD Video Setting Summary MPEG2 AAC 22 Encoder Address Report Window Encoder Address Report 23 Setting Items for Encoder Address Report IP-900 Series 23 Superimpose Window Superimpose 24 Main encoder/Sub encoder superimpose settings IP-900 Series 24 Operation & Status Encoder Window Operation & Status Encoder Operating / Stopped Destination IP address Port number Normal / FaultNormal / Fault / No video signal 25 Encoder Operation & Status Display Items Recorder Setting Recorder 26 Recorder Setting Items 26 File List Window File List IP-900 Series 27 Operation & Status Recorder Operation & Status Recorder Recording / Stopped ｝ 27 Recorder Operation & Status Display Items Decoder Setting Decoder28 Decoder Setting Items 100 28 Decoder Setting Items 101 102 103 Encoder Selection Streaming / Number of possible streams x / Stopped 29 Encoder Selection Items104 105 Operation & Status Decoder 106 30 Decoder Operation & Status Display Items 107 TroubleshootingChapter 108 TroubleshootingClassification Symptom Check Corrective action Check Items and Corrective Action 109 110 Code Alarm LED Goes OnAlarm Codes and Corrective Action 111 112 Alarm Code List 113 114 115 116 117 118 Alarm LED Detail 119 Appendixes Appendixes 120 121 122 123 124 125 126 127 422 128 Case of failure in automatic 129 130