Fujitsu V01 manual Port Description Display, ｛-----｝, Aac

Chapter 3 Web Operation

Port	Item	Description					Display
	Number of	Displays the number of reloading					{-----}
	reloading TS	TS stream without packets					The counter restarts counting from 0 after it
	stream	recovery because of many packets					expires.
		lost.
		*In the following situation, the
		number is counted.
		3.5.1 Setting (Decoder)
		- [ARQ operation] is performed.
		- When the number of data packets
		lost is 4000 or more
		- [ARQ operation] is not
		performed.
		- When the number of data packets
		lost is 24 packets or more.
	Number of	Displays	the	number		of	｛-----｝
	discontinuous PCR	discontinuous PCR values detected					The counter restarts counting from 0 after it
	(*1)	during decoding.					expires.
	Number of jitter	Displays the number of video skip					{-----}
	control buffer	or repeat that occurs when the					The counter restarts counting from 0 after it
	exceeded capacity	decoder cannot absorb the network					expires.
		jitter of the reception packets
		*) It can be lowerd by increasing
		“Jitter control buffer” in “3.5.1
		Setting (Decoder)”.
		*) Its counter may increase even if
		there is no network jitter when the
		decoder receives the stream which
		video resolution is set to 352x288
		or lower	in	“3.3.1	Setting
		(Encoder)”, or which is generated
		by Fujitsu IP-700II.
	Number of video	Displays the number of video					｛-----｝
	decoding errors	decoding	errors	detected	during		The counter restarts counting from 0 after it
	(*1)	decoding.					expires.
	Number of audio	Displays the number of times that					｛-----｝
	PES format	an audio PES packet that the					The counter restarts counting from 0 after it
	mismatch	decoder does not regard as being					expires.
		applicable to decoding is received.
		This is counted specifically in the
		following cases.
		・ For MPEG-1		Layer 2/MPEG2
		AAC
		-During reception of an audio
		stream that is not 1PES/1AAU.
	Number of audio	Displays the number of audio					｛-----｝
	decoding errors	decoding	errors	detected	during		The counter restarts counting from 0 after it
	(*1)	decoding.					expires.
Data port	Number of data	Displays the number of data bytes					{-----}
	received in byte on	received through the RS-232C					The counter restarts counting from 0 after it
	RS-232C	port.					expires.
	Number of data	Displays the number of data bytes					{-----}
	sent in byte on	sent to the RS-232C port.					The counter restarts counting from 0 after it
	RS-232C						expires.
	Number of data	Displays the number of data bytes					{-----}
	received in byte on	received through the LAN port.					The counter restarts counting from 0 after it
	LAN port						expires.

IP-900 Series

60