Fujitsu V01 manual Basic Setting Items, Lan, Dhcp

Chapter 3 Web Operation

After the completion of the settings, click button. The message below appears.

Table 3-4 Basic Setting Items

	Item		Description			Parameter
Ethernet	Ethernet type	Select	the	LAN	interface	- AUTO (default)
common		operation mode.				- 100Base-TX Full
settings						- 100Base-TX Half
						- 10Base-T Full
						- 10Base-T Half
	MTU size	Specify in bytes the maximum				1280 to 1500 bytes
		size of IP packets to be sent to				(Default: 1454)
		the LAN.				* For PPPoE, specify 1454 (recommended).
IPv4 network	IP address mode	Specify the IPv4 address				- DHCP
settings		acquisition method				- PPPoE
						- Static IP (Default)
	IP address	Specify the IPv4 address when				IPv4 address other than the following:
		"Static IP" is set for [IP address				224.0.0.0 to 239.255.255.255 (Class D)
		mode].				240.0.0.0 to 255.255.255.255 (Class E)
						0.0.0.0, 127.0.0.0 to 127.255.255.255
						(Default: 10.0.0.1)
	Subnetmask	Specify the IPv4 subnet mask				Subnet mask other than the following:
		when "Static IP" is set for [IP				255.255.255.254,
		address mode].				255.255.255.255
						(Default: 255.0.0.0)
	Default Gateway	Specify	the	default	gateway	IPv4 address other than the following:
	address	address of IPv4 when "Static				224.0.0.0 to 239.255.255.255 (Class D)
		IP" is set for [IP address mode].				240.0.0.0 to 255.255.255.255 (Class E)
						127.0.0.0 to 127.255.255.255
						(Default: None (represented as 0.0.0.0))
	User ID for	Specify the user ID when				64 en-size alphanumeric characters
	PPPoE	"PPPoE" is set for [IP address				(Default: Blank)
		mode].

IP-900 Series

32