Fujitsu V01 manual Data Port Window

Chapter 3 Web Operation

3.2.6 Data Port

*Data Port is a group of setting items, of which 10 sets can be registered independently by selecting data number as in 3.2.1 Configuration Data.

This setup is performed to enable data communication with another device on the IP network by connecting the external device through the RS-232C port (D-sub 9-pin) provided at the rear of IP-900 series.

Click DATA PORT in the left frame of the Web screen. The Data Port window appears in the right frame, where you can set parameters for data communication with another device via the IP network. Make the required settings by referring to Table 3-7 Data Port Setting Items and Table 3-8

Operations Modes

Figure 3-10 Data Port Window

IP-900 Series

36