Chapter 3 Web Operation
3.4.3 Operation & Status (Recorder)
* This function is enabled only when the device operation mode is encoder mode.
Operation & Status related to recording are displayed.
Selecting {3sec, 5sec, or 10sec} from [Auto update] enables automatic updating of the Operation & Status information in specified time intervals. Selecting {none} from [Auto update] disables automatic updating.
Figure 3-27 Operation & Status (Recorder)
You can control the recording operation. When the recording operation is "Stopped," clicking the 
button starts recording. To stop recording, click the 
button.
IP-900 Series
97
