Chapter 3 Web Operation
3.3.4 Operation & Status (Encoder)
* This function is enabled only when the device operation mode is encoder mode.
Click OPERATION & STATUS in the left frame of the Web screen. The Operation & Status window appears in the right frame.
From this window, you can check encoder operation information such as on encoding and video input.
Selecting {3sec, 5sec, or 10sec} from [Auto update] enables automatic updating of the Operation & Status information in specified time intervals. Selecting {none} from [Auto update] disables the automatic updating.
Figure 3-24 Operation & Status (Encoder) Window
You can control encoding and streaming. When the status is "Stopped," clicking the 
button
starts encoding. To stop encoding, click the 
button.
IP-900 Series
91
