Chapter 3 Web Operation

 

 

 

 

 

 

 

 

 

 

Parameter

Item

 

 

 

Description

 

 

 

 

 

 

Unicast

request

Specify the port number of the own

1024 to 64000

 

 

port

 

device used for receiving a unicast

(Default: 9900)

 

 

 

 

streaming request.

 

 

 

 

You cannot specify this item.

 

 

ARQ control port

Displays the port number of the

 

 

 

 

own device used for controlling

* This item is automatically set according to

 

 

 

 

ARQ.

 

 

 

 

 

the [Streaming port] setting.

 

 

 

 

 

You cannot specify this item.

 

 

Pro-MPEG

FEC

Displays the port number of the

 

 

port

 

own

device

used

for

sending

* This item is automatically set according to

 

 

 

 

Pro-MPEG FEC.

 

 

 

 

the [Streaming port] setting.

 

 

 

 

- IPv4 (default)

Output

IP version

 

Specify the IP version of the IP

interface

 

 

stream for streaming.

 

 

- IPv6

settings (Sub

Streaming mode

Specify the streaming method for

- Multicast (Default)

encoder

 

 

the IP interface.

 

 

 

 

- Unicast (simplex) : Specifying streaming

ethernet)

 

 

 

 

 

 

 

 

 

destination

 

 

 

 

 

 

 

 

 

 

 

- Unicast : Accepting streaming request

 

 

Acceptable

stream

Specify the number of possible

1 to 4 (System rate is to 5.750 Mbps)

 

 

number

 

streams.

 

 

 

 

 

1 to 3 (System rate is 5.751 to 7.666 Mbps)

 

 

 

 

* The contents that can be set

1 to 2 (System rate is 7.667 to 11.500 Mbps)

 

 

 

 

depend on the [System bit rate]

1 (System rate is 11.501 Mbps or higher)

 

 

 

 

setting.

 

 

 

 

 

 

 

 

 

 

 

 

*

If "Multicast"

or

"Unicast

* Default is 1

 

 

 

 

(simplex)"

is

specified

for

 

 

 

 

 

 

 

[Streaming mode], only "1" can be

 

 

 

 

 

 

 

specified.

 

 

 

 

 

IP address

 

 

Streaming

 

If

"Multicast"

 

or

"Unicast

 

 

destination

IP

(simplex)"

is

specified

for

(Default: 230.11.3.1)

 

 

address

 

[Streaming

mode],

specify

the

Setting the following values is inhibited:

 

 

 

 

destination IP address of the

[IPv4]

 

 

 

 

streaming IP stream.

 

 

240.0.0.0 to 255.255.255.255 (Class E)

 

 

 

 

 

 

 

 

 

 

 

0.0.0.0, 127.0.0.0 to 127.255.255.255

 

 

 

 

 

 

 

 

 

 

 

[IPv6]

 

 

 

 

 

 

 

 

 

 

 

0::0

 

 

 

ARP auto update

If "Unicast (simplex)" is specified

-

Enable (Default)

 

 

 

 

for

[Streaming

mode],

specify

-

Disable

 

 

 

 

whether to send ARP at regular

 

 

 

 

 

 

 

intervals

to

 

check

the

 

 

 

 

 

 

 

communication with the streaming

 

 

 

 

 

 

 

destination.

 

 

 

 

 

-

Enable

 

 

ID control for

If "Unicast" is specified for

 

 

unicast

 

[Streaming mode], specify whether

-

Disable (Default)

 

 

 

 

to check the ID for confirming the

* If "Enable" is selected, the Unicast ID of the

 

 

 

 

validity of a unicast stream

encoder and that of the decoder must be in

 

 

 

 

request.

 

 

 

 

 

agreement to perform streaming.

 

 

Unicast ID

 

If "Enable" is selected for [ID

Hexadecimal number between 0000 and ffff

 

 

 

 

control for unicast], specify the ID

(Default: 0000)

 

 

 

 

to be used for confirming the

 

 

 

 

 

 

 

validity of a unicast streaming

 

 

 

 

 

 

 

request.

 

 

 

 

 

- Enable (Default)

 

 

FEC

 

Specify whether to generate FEC

 

 

 

 

packets.

 

 

 

 

 

- Disable

 

 

FEC interval

Set the insertion interval for

 

4 to 24 (Default: 10)

 

 

 

 

generating an FEC packet.

 

 

 

 

IP-900 Series

71

Page 77
Image 77
Fujitsu V01 manual Description Unicast