Main Features, IP-900E Specifications, Pps Id | Fujitsu V01 guide

Chapter 1 Before Using This Product

1.1.1 Main Features

IP-900 series is a video encoder that uses the high compression video encoding technology H.264. It enables real-time streaming of high definition (HD) and standard definition (SD) video through the optical fiber networks like FTTH.

The IP-900E can operate as an encoder and the IP-900D/IP-900IID can operate as a decoder. When operating as an encoder, the IP-900E encodes input video and audio signals into the H.264 format and distributes the results over an IP network in real-time processing. When operating as a decoder, the IP-900D/IP-900IID decodes encoded data received over an IP network and outputs the results as audio and video signals. In addition, the IP-900E operating as an encoder provides a recorder function (*1), which allows HD video data to be transmitted over a longer period of time even when the network bandwidth is low.

IP-900E encoder also features simulcast (dual encoding) capability to distribute two kinds of the encoded streams that are produced from a single video input by main and sub encoder of IP-900E in real-time.

Table 1-1 IP-900E Specifications

The main HD video and sub HD video functions become available when the HD option is added.

Item

Specification

Main HD	Encoding format	H.264 HP@L4
video		H.264 MP@L4
	Input video format	1920 x 1080i (59.94 Hz)
		1920 x 1080i (50 Hz)
		1920 x 1080i (60 Hz)
		1280 x 720p (59.94 Hz)
		1280 x 720p (50 Hz)
		* Video input protection buffer OFF/ON can be specified.
	Bit rate	1920 x 1080: 4 to 27 Mbps
		1440 x 1080: 4 to 27 Mbps
		960 x 1080: 1 to 27 Mbps
		1280 x 720: 4 to 27 Mbps
		960 x 720: 4 to 27 Mbps
		640 x 720: 1 to 27 Mbps
	Video PES	“1Field/1PES” / “1Frame/1PES” selectable

	Profile selection	Either High profile or Main profile can be selected.

	PPS interval	GOP/Picture selectable

	PPS ID	Fixed/Adaptive selectable
	Encoding control	Standard (IBBP), Low latency (IPPP), or Low latency (PPPP) can be selected.
	mode
	Pre-filter	HEAVY, MEDIUM, LIGHT, or OFF can be selected.

	Refresh cycle	Selection can be made in three stages.

	Interfaces	Input: HD-SDI and HDMI (HDCP not supported)
Main SD	Encoding format	H.264 HP@L3
video		H.264 MP@L3

IP-900 Series

3

Image 9

Fujitsu V01 manual Main Features, IP-900E Specifications, Pps Id

Contents

Software Handling of This Manual Using IP-900 Series Safely Product Use Environment Preface Alert Indication in This Manual Alert Indications Maintenance Contents Appendixes 119 Troubleshooting 107 Chapter IP-900E Specifications Main FeaturesSpecification PPS ID IP-900 Series UDP, RTP CF cards are separately sold options IP-900D/IP-900IID Specifications Typical Application Examples System configuration example SNG Installation & Operation Installation & Operation Updating the Software Installation Procedure IP-900 Series Label at the bottom of the IP-900E example Installing an HD Option License IP-900 series Web page example Option License Installation Operation through Web Screen Equipment OperationCase of failure in automatic acquisition of an IP address Forcibly changing to the fixed IP address from DHCP, PPPoE Powering off on PPPoE connection Web Operation Chapter Starting Up Login IP-900E Software Window Example IP-900D/IP-900IID Software Window Example If the Screen is Not Accessible Configuration Data Parameters Preprogrammed in Configuration DataCommon Menu Setting decoder Setting RecorderEncoder Address Report Superimpose Configuration Data Window Selecting Configuration Data Selecting Configuration Data Registering configuration data Configuration Data 10 independent sets Using configuration data Description Parameter Configuration Data Selection Items Copy Configuration Window Copying Configuration Data Copy Configuration Setting Items Basic Information Window Basic Basic Setting Items LANDhcp Description Time Zone & Time Server Window Time Zone & Time Server Time Server Setting Items Time Zone Setting Item 10 Data Port Window Data Port Data Port Setting Items Operation Modes Operation mode Description 11 Snmp Window Snmp Snmp Setting Items 12 Operation & Status Window Operation & Status Common 10 Operation & Status Display Items Bidirectional Normal/FaultIP address Port number 13 Alarm Window Alarm 11 Alarm List IP-900 Series 12 Input data error bit format 14 Log Window 10 Log 13 Log Type Txfd IP-900 Series IP-900 Series IP-900 Series IP-900 Series 15 Performance Statistics Window Main Encoder Performance Statistics 16 Performance Statistics Window Sub-encoder 17 Performance Statistics Window Decoder 18 Performance Statistics Window Data Port Port Description 14 Performance Statistics Items Port Description Display ｛-----｝AAC IP-900 Series 19 Date & Time Window Date & Time 20 Software Management Window Software Management Backup Restore15 Software Management Items Delete ALL Reboot Encoder Setting Encoder 21 Settings Screen Encoder Hdmi 16 Encoder Setting Items Values available when Video input is ARQ FECTOS UDP Description Unicast Description Parameter Setting Summary Setting RangeMain Encoder /Sub encoder System Bit Rate Audio Setting Summary Encoder SD Video Setting SummaryEncoder HD/SD & Sub encoder HD/SD Light Medium Heavy Null Resolution None None Sub encoder SD Video Setting Summary 352x576 video resolution and Table176x144 video resolution Sub On the Audio format setting MPEG2-TS Null 17 Main encoder /Sub encoder System Bit Rate Setting Range Ibbp Ippp Pppp 18 Main encoder HD / Sub encoder HD Video Setting Summary Ibbp Ippp Pppp 19 Main encoder SD Video Setting Summary MPEG2 AAC 22 Encoder Address Report Window Encoder Address Report 23 Setting Items for Encoder Address Report IP-900 Series 23 Superimpose Window Superimpose 24 Main encoder/Sub encoder superimpose settings IP-900 Series 24 Operation & Status Encoder Window Operation & Status Encoder Normal / Fault / No video signal Destination IP address Port number Normal / Fault25 Encoder Operation & Status Display Items Operating / Stopped Recorder Setting Recorder 26 Recorder Setting Items 26 File List Window File List IP-900 Series 27 Operation & Status Recorder Operation & Status Recorder Recording / Stopped ｝ 27 Recorder Operation & Status Display Items Setting Decoder 28 Decoder Setting ItemsDecoder 100 28 Decoder Setting Items 101 102 103 Encoder Selection 29 Encoder Selection Items 104Streaming / Number of possible streams x / Stopped 105 Operation & Status Decoder 106 30 Decoder Operation & Status Display Items 107 TroubleshootingChapter Classification Symptom Check Corrective action TroubleshootingCheck Items and Corrective Action 108 109 110 Alarm Codes and Corrective Action Alarm LED Goes On111 Code 112 Alarm Code List 113 114 115 116 117 118 Alarm LED Detail 119 Appendixes Appendixes 120 121 122 123 124 125 126 127 422 128 Case of failure in automatic 129 130