Chapter 3 Web Operation
Code | Name | Description | Details (The part after the * mark is not displayed.) |
I002 | HDMI input down | HDMI input signal not detected | － |
*I002 | HDMI input down recovery | Normal HDMI input | － |
I003 | Analog input down | Analog video input signal not detected |
|
*I003 | Analog input down recovery | Normal analog video input |
|
I011 | Video input synchronization error | Video input PLL synchronization error | － |
|
| occurred |
|
*I011 | Video input synchronization error | Recovered from video input PLL | － |
| recovery | synchronization error |
|
I021 | Input data error (*8) | #xxxxxxxxxxxxxxxx | |
|
| statistics error counter | * |
|
|
| bit, see Table |
*I021 | Input data error recovery (*8) | Recovered from | － |
|
| performance statistics error counter |
|
E001 | Power error (*1) | Power failure occurred | #1 * Power failure on CNT board |
|
|
| #2 * Power failure on COD board |
E003 | Temperature error occurrence (*5) | Extreme temperature (shutdown processing | * Details are as follows: |
|
| started) | #1/#2: Number of the temperature sensor that has |
|
|
| detected a temperature error |
|
|
| t1: Temperature indicated by temperature sensor 1 |
|
|
| t2: Temperature indicated by temperature sensor 2 |
|
|
| xxx: FAN rotational speed |
E004 | Flash ROM error (*1) | Internal flash ROM access error occurred | /dev/mtd0 to 15 |
|
|
| * Displays the occurrence range of access error. |
E00A | Flash ROM check sum error (*1) | Operation data error detected in internal | Software |
|
| Flash ROM | bundle software |
|
|
| configuration |
|
|
| configuration#1～#10 |
|
|
| * Displays the occurrence range of check sum errors. |
E010 | FAN error (*2) | FAN error (low speed) or stopped | xxxRPS * xxx: FAN rotational speed |
*E010 | FAN error recovery (*2) | FAN speed recovery | xxxRPS * xxx: FAN rotational speed |
IP-900 Series
52
