Setting Items for Encoder Address Report | Fujitsu V01 specification

Chapter 3 Web Operation

After the completion of the settings, click the button. The message below appears. Click OK to apply the settings. * Reboot is not required.

Table 3-23 Setting Items for Encoder Address Report

	Item			Description				Value
Main	Encoder name			Specify an arbitrary name				Up to 16 characters
encoder				used to identify the encoder.
report
settings
	Local port			Specify the own device port				0 or 1024 to 64000 (Default: 0)
				number used to send an				* If 0 is specified, one of the port numbers
				encoder address message.				from 64100 to 65000 is automatically selected.
Main	Destinat		IP version	Specify the IP version of the				- IPv4 (default)
encoder	ion 1 to			IP address of the destination				- IPv6
destination	10			device to which the encoder
settings				report is to be sent.
			IP address	Specify the IP address of the				Other than 0.0.0.0
				destination device to which				(Default: Blank)
				the encoder report is to be				* A blank field means that no value is
				sent.				specified.
								* A multicast address cannot be set.
			Destination	Specify the port number of				- Blank or 1024 to 64000
			port	the	destination	device	to	(Default: Blank)
				which the encoder report is				* A blank field means that no value is
				to be sent.				specified.
Sub encoder	Encoder	name		Specify an arbitrary name				Up to 16 characters
report				used to identify the encoder.
settings
	Local port			Specify the own device port				0 or 1024 to 64000 (Default: 0)
				number used to send an				* If 0 is specified, one of the port numbers
				encoder address message.				from 64100 to 65000 is automatically selected.
Sub encoder	Destinat		IP version	Specify the IP address of the				- IPv4 (Default)
destination	ion 1 to			destination device to which				- IPv6
settings	10			the encoder report is to be
			IP address	sent.				Other than 0.0.0.0
								(Default: Blank)
								* A blank field means that no value is
								specified.
								* A multicast address cannot be set.
			Destination	Specify the port number of				- Blank or 1024 to 64000
			port	the	destination	device	to	(Default: Blank)
				which the encoder report is				* A blank field means that no value is
				to be sent.				specified.

IP-900 Series

86

Image 92

Fujitsu V01 manual Setting Items for Encoder Address Report

Contents

Software Using IP-900 Series Safely Handling of This Manual Preface Product Use Environment Alert Indications Alert Indication in This Manual Maintenance Contents Troubleshooting 107 Appendixes 119 Chapter Main Features IP-900E SpecificationsSpecification PPS ID IP-900 Series UDP, RTP CF cards are separately sold options IP-900D/IP-900IID Specifications System configuration example SNG Typical Application Examples Installation & Operation Installation & Operation Installation Procedure Updating the Software IP-900 Series Installing an HD Option License Label at the bottom of the IP-900E example IP-900 series Web page example Option License Installation Equipment Operation Operation through Web ScreenCase of failure in automatic acquisition of an IP address Forcibly changing to the fixed IP address from DHCP, PPPoE Powering off on PPPoE connection Chapter Web Operation Login Starting Up IP-900E Software Window Example IP-900D/IP-900IID Software Window Example If the Screen is Not Accessible Common Menu Configuration DataParameters Preprogrammed in Configuration Data Setting Recorder Setting decoderEncoder Address Report Superimpose Selecting Configuration Data Configuration Data Window Registering configuration data Selecting Configuration Data Configuration Data 10 independent sets Using configuration data Configuration Data Selection Items Description Parameter Copying Configuration Data Copy Configuration Window Copy Configuration Setting Items Basic Basic Information Window Dhcp Basic Setting ItemsLAN Description Time Zone & Time Server Time Zone & Time Server Window Time Zone Setting Item Time Server Setting Items Data Port 10 Data Port Window Data Port Setting Items Operation mode Description Operation Modes Snmp 11 Snmp Window Snmp Setting Items Operation & Status Common 12 Operation & Status Window 10 Operation & Status Display Items Normal/Fault BidirectionalIP address Port number Alarm 13 Alarm Window 11 Alarm List IP-900 Series 12 Input data error bit format 10 Log 14 Log Window 13 Log Type Txfd IP-900 Series IP-900 Series IP-900 Series IP-900 Series Performance Statistics 15 Performance Statistics Window Main Encoder 16 Performance Statistics Window Sub-encoder 17 Performance Statistics Window Decoder 18 Performance Statistics Window Data Port 14 Performance Statistics Items Port Description AAC Port Description Display｛-----｝ IP-900 Series Date & Time 19 Date & Time Window Software Management 20 Software Management Window Restore Backup15 Software Management Items Delete ALL Reboot Setting Encoder Encoder 21 Settings Screen Encoder 16 Encoder Setting Items Hdmi Values available when Video input is FEC ARQTOS UDP Description Unicast Description Parameter Setting Range Setting SummaryMain Encoder /Sub encoder System Bit Rate Encoder HD/SD & Sub encoder HD/SD Audio Setting SummaryEncoder SD Video Setting Summary Null Light Medium Heavy Resolution None None 352x576 video resolution and Table Sub encoder SD Video Setting Summary176x144 video resolution Sub On the Audio format setting MPEG2-TS Null 17 Main encoder /Sub encoder System Bit Rate Setting Range 18 Main encoder HD / Sub encoder HD Video Setting Summary Ibbp Ippp Pppp 19 Main encoder SD Video Setting Summary Ibbp Ippp Pppp MPEG2 AAC Encoder Address Report 22 Encoder Address Report Window 23 Setting Items for Encoder Address Report IP-900 Series Superimpose 23 Superimpose Window 24 Main encoder/Sub encoder superimpose settings IP-900 Series Operation & Status Encoder 24 Operation & Status Encoder Window Destination IP address Port number Normal / Fault Normal / Fault / No video signal25 Encoder Operation & Status Display Items Operating / Stopped Setting Recorder Recorder 26 Recorder Setting Items File List 26 File List Window IP-900 Series Operation & Status Recorder 27 Operation & Status Recorder 27 Recorder Operation & Status Display Items Recording / Stopped ｝ Decoder Setting Decoder28 Decoder Setting Items 28 Decoder Setting Items 100 101 102 Encoder Selection 103 Streaming / Number of possible streams x / Stopped 29 Encoder Selection Items104 Operation & Status Decoder 105 30 Decoder Operation & Status Display Items 106 TroubleshootingChapter 107 Troubleshooting Classification Symptom Check Corrective actionCheck Items and Corrective Action 108 109 110 Alarm LED Goes On Alarm Codes and Corrective Action111 Code Alarm Code List 112 113 114 115 116 117 Alarm LED Detail 118 Appendixes Appendixes 119 120 121 122 123 124 125 126 127 128 422 129 Case of failure in automatic 130