Fujitsu V01 manual Data Port Setting Items

Chapter 3 Web Operation

After the completion of the settings, click the button. The message below appears. Click OK to apply the settings. *Reboot is not required.

Table 3-7 Data Port Setting Items

	Item	Description	Parameter
Operation	Data port	Specify whether to use data port	- Enable
settings		communication.	- Disable (Default)
	Operation mode	Specify the operation mode of data	- TCP server mode (bidirectional)
		port communication.	(Default)
			- TCP server mode (receiving only)
			- TCP client mode (bidirectional)
	IP version	Set the IP address version	- IPv4 (Default)
			- IPv6
	Destination IP	Specify the IP address of the data	- IPv4 (Default)
	address	communication destination when	- IPv6
		"TCP client mode (bidirectional)" is
		set for [Test mode].
		Specify the IP address of the data	Other than 0.0.0.0
		communication destination when	(Default: 0.0.0.0)
		"TCP client mode (bidirectional)" is
		set for [Test mode].
Port number	Server mode	Specify the port number of the own	1024 to 64000
settings		device when "TCP server mode	(Default: 6000)
		(bidirectional)" is set for [Test mode].
	Client mode	Specify the port number of the own	0 or 1024 to 64000
		device when "TCP client mode	(Default: 0)
		(bidirectional)" is set for [Test mode].	* If o is specified, a port number from
			1024 to 4096 is automatically selected.
		Specify the port number of the	1024 to 64000
		destination device when "TCP client	(Default: 6000)
		mode (bidirectional)" is set for [Test
		mode].
RS-232C	Timeout	Specify in milliseconds the reception	20 to 200ms (Default: 20)
settings		timeout time for RS-232C.	* The duration to detect a time-out is
			defined as "the set value rounded down
			by a multiple of '20[ms]'" + "RS-232C
			polling interval of the device (20[ms])".
			ex)
			When '60' is set, the duration will be
			'60' + '20' = 80 [ms]
			When '50' is set, the duration will be
			'40' + '20' = 60 [ms]

IP-900 Series

37