|
|
|
|
|
|
| Chapter 3 Web Operation |
|
|
|
|
|
|
|
|
| |
|
| Item | Description |
|
| Parameter |
| |
|
| ARQ buffering time | Specify the wait time in msec for an | 0 to 2000 ms |
| |||
|
|
| ARQ retransmitted packet. |
| (Default: 300 ms) |
| ||
|
|
| * This will increase the delay by the |
|
| |||
|
|
| time specified here. |
|
|
|
| |
|
|
|
|
|
|
| - Enable |
|
|
| Specify | whether | to | receive |
| ||
|
|
| - Disable (Default) |
| ||||
|
|
| the |
|
| |||
|
|
| method. |
|
|
| 1024 to 64000 |
|
Input | Streaming port | Specify the own device port number |
| |||||
interface |
| used to receive streams. |
| (Default: 5000) |
| |||
settings | Unicast request port | Specify the streaming request | 0, or10240 to 64000 (Default: 0) |
| ||||
(Decoder |
| source port number (own device) in | * If 0 is specified, one of the port |
| ||||
ethernet |
| unicast streaming mode. |
| numbers from 32768 to 61000 is |
| |||
port) |
|
|
|
|
| automatically selected. |
| |
|
|
| Specify the streaming request | 1024 to 64000 (Default: 9900) |
| |||
|
|
| destination port number in unicast |
|
| |||
|
|
| streaming mode. |
|
| 1024 to 64000 (Default: 5100） |
| |
|
| Encoder address | Specify the own device port number |
| ||||
|
| report port | used to receive an encoder address |
|
| |||
|
|
| report. |
|
|
| You cannot specify this item. |
|
|
| Displays the port number of the |
| |||||
|
|
| own device used | for | receiving | * This item is automatically set |
| |
|
|
|
|
| according to the [Streaming port] |
| ||
|
|
|
|
|
|
| setting. |
|
|
| ARQ control port | Displays the port number of the | You cannot specify this item. |
| |||
|
|
| own device used for controlling | * This item is automatically set |
| |||
|
|
| ARQ. |
|
|
| according to the [Streaming port] |
|
|
|
|
|
|
|
| setting. |
|
AV output | Output format at | Specify the format of the video | - 1080i/59.94 |
| ||||
settings | startup | output signal to be used after the | - 1080i/50 |
| ||||
(video) |
| device is started or after the decoder | - 1080i/60 |
| ||||
|
|
| settings are changed. |
|
| - 720p/59.94 |
| |
|
|
| * When any stream has been | - 720p/50 |
| |||
|
|
| received, a setting conforming to | - 480i/59.94 (Default) |
| |||
|
|
| the input format of the encoder is | - 576i/50 |
| |||
|
|
| used. |
|
|
| - Enable: 7.5 IRE |
|
|
| Analog video setup | Specify the setup level of the analog |
| ||||
|
|
| video output signal. |
|
| - Disable (Default): Same as the pedestal |
| |
|
|
|
|
|
|
| level |
|
|
| Concealment time | Specify the time it takes until the | - 5 to 600 seconds |
| |||
|
|
| system recognizes that packets have | (Default: 10 seconds) |
| |||
|
|
| not been received. |
|
| - Blue (Default) |
| |
|
| Display when no data | Specify the video signal to be output |
| ||||
|
| receiving | when no packets are received. | - Gray |
| |||
Decoder | Decoding operation | Specify whether to enable receiving | - Enable. |
| ||||
settings |
| and decoding streaming video upon | - Disable. (Default) |
| ||||
(Decode) |
| starting. |
|
|
| - Enable (Default) |
| |
|
| Error concealment | Specify whether to enable the freeze |
| ||||
|
|
| control that prevents block noise in | - Disable |
| |||
|
|
| the event of packet loss. |
|
|
| ||
