Fujitsu V01 manual Fec, Arq, Tos, Udp

Chapter 3 Web Operation

Item			Description					Parameter
	ARP auto update	If "Unicast (simplex)" is specified						-	Enable (Default)
		for	[Streaming		mode],	specify		-	Disable
		whether to send ARP at regular
		intervals		to	check		the
		communication with the streaming
		destination.
	ID control for	If "Unicast" is specified for						-	Enable
	unicast	[Streaming mode], specify whether						-	Disable (Default)
		to check the ID for confirming the						* If "Enable" is selected, the Unicast ID of the
		validity of a unicast stream						encoder and that of the decoder must be in
		request.						agreement to perform streaming.
	Unicast ID	If "Enable" is selected for [ID						Hexadecimal number between 0000 and ffff
		control for unicast], specify the ID
		to be used for confirming the
		validity of a unicast streaming
		request.
	FEC	Specify whether to generate FEC						- Enable (Default)
		packets.						- Disable
	FEC interval	Set the insertion interval for						4 to 24 (Default: 10)
		generating an FEC packet.
	ARQ	If "Unicast" is specified for						- Enable
		[Streaming mode], specify whether						- Disable (Default)
		to enable the ARQ error correction
		method.
	TOS	Set IP packet TOS value.						Hexadecimal number between 00 and ff
								(Default: 0)
	Protocol	If	"Multicast"		or	"Unicast		-	UDP
		(simplex)"		is	specified		for	-	RTP (Default)
		[Streaming mode] and "Disable" is							* If "UDP" is selected, "Standard TS" is
		selected for [FEC], specify the IP							fixedly selected for [Stream format].
		transport protocol.
	Stream format	If	"Multicast"		or	"Unicast		-	Standard TS
		(simplex)"		is	specified		for	-	Time stamped TS (Default)
		[Streaming mode], "Disable"					is
		selected for [FEC], and "RTP" is
		specified for		[Protocol],		specify
		the stream format.
	Pro-MPEG FEC	If "Standard TS" is selected for						- Enable
		[Stream format],			specify	whether		- Disable (Default)
		to generate Pro-MPEG FEC
		packets.
	Pro-MPEG Matrix	If	"Enable"	is	selected		for	A value of [4 to 20] x [4 to 20] can be set.
		[Pro-MPEG FEC], specify the						(Default: 10 x 10)
		generation matrix values for FEC						* N x N values that exceed 100 cannot be set.
		packets.
Output	Streaming port	Specify the own device port						0, 1024 to 64000 (Default: 0)
interface		number used for sending streams.						* If 0 is set, a port number between 64100 and
settings								65000 is automatically selected.
(Sub		Specify the port number of the						1024 to 64000
encoder		destination device used for sending						(Default: 5000)
ethernet		streams.
port)

IP-900 Series

70