Fujitsu V01 manual Operation & Status Display Items

Chapter 3 Web Operation

Table 3-10 Operation & Status Display Items

Item

Display

Serial number	Displays the serial number
IP address (IPv4)	{DHCP/PPPoE/Static IP}
	Displays the IPv4 address acquisition mode.
	[xxx.xxx.xxx.xxx (IPv4)］
	Displays the IPv4 address.
	xxx.xxx.xxx.xxx: IPv4 address
Subnetmask (IPv4)	xxx.xxx.xxx.xxx
	Displays the IPv4 subnet mask.
	xxx.xxx.xxx.xxx: Subnet mask
Default gateway address (IPv4)	xxx.xxx.xxx.xxx
	Displays the default gateway address of IPv4.
	xxx.xxx.xxx.xxx: Default gateway address
IP address (IPv6)	Link-Local/[xxxx:xxxx: ... :xxxx(IPv6)]
	Displays the IPv6 link-local address.
	xxxx:xxxx: ... :xxxx: Link-Local address
	{Stateless/Static IP}
	Displays the IPv6 address acquisition method.
	* If the IPv6 address acquisition method is "Stateless," up to four sets of global
	unicast address/prefix are displayed according to the address acquisition
	status.
	[yyyy:yyyy: ... :(IPv6)]
	Displays the IPv6 global unicast address.
	yyyy:yyyy: ... :yyyy: Global unicast address
	[zzz]
	Displays the prefix of the IPv6 global unicast address.
	zzz: Prefix
Default gateway address (IPv6)	xxxx:xxxx: ... :xxxx
	Displays the default gateway address of IPv6.
	xxx:xxx. ... :xxx: Default gateway address
	* If the IPv6 address acquisition method is "Stateless," up to four default
	gateway addresses are displayed according to the address acquisition status.
LAN MAC address	Displays the MAC address.
LAN link	{Connected / Disconnected}
	Displays the LINK status.
	{100Base-TX Full Duplex / 100Base-TX Half Duplex / 10Base-T Full
	Duplex / 10Base-T Half Duplex}
	Displays the LAN interface operation status.
Time server	{Normal / Fault / Synchronization failure/ ---}
	Displays the status of synchronization with the specified time server.

IP-900 Series

42