Chapter 3 Web Operation
3.2.4 Basic
*Basic comprises a group of setting items, of which 10 sets can be registered independently by selecting data numbers as in 3.2.1 Configuration Data.
You can set or change the settings of the parameters related to the network connection of IP-900 series or the operation mode in which it should operate after power-on. Make the required settings by referring to Table 3-4 Basic Setting Items.
IMPORTANT
If you operate IP-900 series with the default IP address, disconnect it from your network. Connect it to the setting terminal via a hub or directly through a UTP cable. From the setting terminal, set it up to meet the requirements for your network and then connect it to the network. If you connect it to your network with the default IP address, an unexpected fault may occur in your network.
Figure 3-8 Basic Information Window
IP-900 Series
