Fujitsu V01 manual Common Menu, Parameters Preprogrammed in Configuration Data

Chapter 3 Web Operation

3.23.2 Common Menu

3.2.1 Configuration Data

In the IP-900 series terminology, the set of parameters required for operation is called "configuration data." IP-900 series has a data storage area in which up to 10 sets of configuration data can be stored. By storing up to 10 sets of configuration data in advance in the storage area, it can be used by switching with ease between these sets of configuration data.

For instance, it is useful in switching between encoder and decoder, changing resolution or bit rates or switching the network interfaces including PPPoE, DHCP, static IP, etc.

To easily register these 10 sets of configuration data, you can use the procedures explained in Section 3.2.2, "Selecting Configuration Data," and Section 3.2.3, "Copying Configuration Data."

Table 3-1 Parameters Preprogrammed in Configuration Data lists the parameters, of which 10 sets can be stored independently as configuration data. For detail information on the individual parameters, see the respective sections shown in the reference column in the table below.

Table 3-1 Parameters Preprogrammed in Configuration Data

Category	Window Name	Group Name			Reference
COMMON	BASIC	Ethernet common setting			3.2.4 Basic
		IPv4 network settings
		IPv6 network settings
		Other settings
	TIME ZONE &	Time zone setting			3.2.5 Time Zone & Time Server
	TIME SERVER	Time server settings
	DATA PORT	Operation settings			3.2.6 Data Port
		Port number settings
		RS-232C settings
	SNMP	Operation settings			3.2.7 SNMP
ENCODER	SETTINGS	AV input settings (Video)			3.3.1 Setting (Encoder)
		AV input settings (Audio)
		Output	interface	settings
		(Main encoder ethernet)
		Output	interface	settings
		(Main encoder ethernet port)
		Output	interface	settings
		(Sub encoder ethernet)
		Output	interface	settings
		(Sub encoder ethernet port)
		Main	encoder	settings
		(Encode)
		Sub	encoder	settings
		(Encode)

IP-900 Series

22