Fujitsu V01 manual Registering configuration data, Selecting Configuration Data

Chapter 3 Web Operation

◆Registering configuration data

Select data numbers 1 to 10 from the drop-down list menu in the configuration data field.

Figure 3-4 Selecting Configuration Data

Assign the selected data a name using up to 16 alphanumeric characters in the Configuration

name field, and then click the button. The dialog box shown below appears. Click the OK button to change the registration number of the configuration data.

*) Reboot is required only when the operation mode is changed between encoder and decoder after loading configuration.

Confirm that the configuration data number in the upper right red zone on the Basic setting window has been changed to the previously selected number.

Configuration1: data1 Software: VxxLxxx

IP-900 Series

25