Fujitsu V01 manual IP-900 Series

Chapter 2 Installation & Operation

(3) Selecting software

Select installation file field. Select the file of the firmware to be updated.

(4) Starting installation
Click the	button. The following confirmation dialog box appears. Click the OK

button to start installation. Upon completion of installation, IP-900 series is automatically rebooted.

*If the version of the firmware that to be installed is earlier than the one that is currently installed on the IP-900 series, you can install it in the maintenance mode of the device. The device can be booted as maintenance mode by pushing MNT button, and then the device is initialized. Click the OK button to start the installation process if initialization will raise no problems.

(5)Verifying the startup

Display the IP-900 series setup window from the Web browser, and verify that the new software has been installed and started.

Do not power off or press the MNT button during installation. Doing so may prevent IP-900 series from starting.

Do not access another Web page during installation. Otherwise, you may lose information on the progress.

IP-900 Series

11