Fujitsu V01 manual Description

Chapter 3 Web Operation

	Item	Description
	Password for	Specify the password when
	PPPoE	"PPPoE" is set for [IP address
		mode].
IPv6 network	IP address mode	Specify the IPv6 address
settings		acquisition method.
	IP address	Specify the IPv6 address when
		"Static IP" is set for [IP address
		mode].
	Prefix	Specify the prefix of the IPv6
		address when "Static IP" is set
		for [IP address mode].
	Default gateway	Specify the default gateway
	address	address when "Static IP" is set
		for [IP address mode].
Other settings	User	Specify whether to enable user
	authentication	authentication for accessing the
		Web screen.
	User ID	Specify the user name for
		authentication.
	Password	Specify the password for
		authentication.
	WEB server title	Specify the character string to
		be displayed on the title bar of
		the Web screen. It will be used
		to identify the Web screen with
		the equipment name.

Parameter

64 en-size alphanumeric characters (Default: Blank)

-Stateless

-Static IP (default)

Global unicast IP address 2xxx:xxxx:…:xxxx to 3xxx:xxxx:…:xxxx (Default: ::)

3 to 128 (Default: 64)

Global unicast address 2xxx:xxxx:...:xxxx to 3xxx:xxxx:...:xxxx (Default: ::)

-Enable

-Disable (Default)

16 en-size alphanumeric characters (Default: Blank)

16 en-size alphanumeric characters (Default: Blank)

The specified string must be not exceed 64 bytes (assuming one double-space character as 2 bytes and one single-space character as 1 byte). (Default: blank)

*Single-space kana characters are handled as double-space characters.

Note: If power-on is performed in combination with the Cancel key (see IP-900 series User’s Guide), the IP address and subnet mask on both LAN and CONSOLE ports are temporarily reset to the defaults (LAN IPv4 address 10.0.0.1, subnet mask 255.0.0.0, IPv6 address :: and prefix: 64). If it becomes unclear what an IP address is, connect the equipment with the defaults and use the setup menu to confirm the IP address and subnet mask. In this case, the password restriction is also disabled. Hold down the MNT button until the RDY LED starts blinking in orange. The equipment reboots, and the IP address and subnet mask that were set for the equipment are restored.

IP-900 Series

33