3. PLOTTER OPERATION

3.6.6Erasing track

This paragraph shows you how to erase own ship’s track and target tracks. You can erase ship’s track three ways: collectively, by color (color model only) and by area.

Erasing own ship track by area

You can erase own ship’s track by area as below. This function is not available on the overlay display (MODEL1722C/1723C series).

1.Press the [MENU] key followed by the CHART SETUP, TRACKS & MARKS CONTROL and ERASE T & M soft keys to show the ERASE menu.

ERASE ALL TRACKS

ERASE TRACKS BY AREA

ERASE TRACKS BY COLOR

ERASE TARGET TRACKS

ERASE ALL MARKS/LINES

ERASE MARKS BY AREA

ERASE

EDIT

ERASE ALL TRACKS

ERASE TRACKS BY AREA

ERASE TARGET TRACKS

ERASE ALL MARKS/LINES

ERASE MARKS BY AREA

ERASE

EDIT

SHIP’S TRACK STATUS

TRACKING

TRACK: 1234/2000

MARK : 9/6000

RETURN

RETURN

SHIP’S TRACK STATUS

TRACKING

TRACK: 1234/2000

MARK : 9/6000

MODEL1722C/1723C series

MODEL1722 series

Erase menu

2.Use the cursor pad to select ERASE TRACKS BY AREA and press the EDIT soft key. The menu is erased and the plotter display appears.

3.Use the cursor pad to place the cursor at the top left of corner which you want to erase track from.

4.Press the START soft key or the [ENTER] knob.

5.Drag the cursor diagonally to the bottom right corner of the area which you want to erase track from.

6.Press the END soft key or the [ENTER] knob. You are asked if it is all right to delete the track.

7.Push the [ENTER] knob to delete the track selected.

8.Press the [MENU] key twice to close the menu.

3-23

Page 107
Image 107
Furuno 1763C, 1753C, 1742, 1733C, 1752, 1723C, 1762C, 1732, 1722C Erasing track, Erasing own ship track by area, Erase menu