Furuno 1723C Resetting Trip Distance, Alarm messages, Plotter alarm messages and their meanings

3. PLOTTER OPERATION

Alarm messages

The table below shows the plotter alarm messages and their meanings

Plotter alarm messages and their meanings

Message	Meaning
ARRIVED AT XXX WAYPOINT!	Arrival alarm violated.
(XXX = waypoint number)
ENTERED INTO AVOIDANCE	Proximity alarm violated.
AREA!
EXCEEDED ANCHOR WATCH	Anchor watch alarm violated.
LIMIT!
EXCEEDED XTE LIMIT!	XTE alarm violated.
SPEED ALARM!	Speed alarm violated.
TEMPERATURE ALARM!	Water temperature alarm
	violated.
TRIP ALARM! MILEAGE	Trip alarm violated.
EXCEEDED

3.12Resetting Trip Distance

Trip distance is shown on the navigation data display. You can reset the trip distance to zero as follows:

1.Press the [MENU] key.

2.Press the SYSTEM CONFIGURATION and GENERAL SETUP soft keys in that order to show the GENERAL SETUP menu.

▲

KEY BEEP ON LANGUAGE

ENGLISH

RANGE UNIT nm, kt

TEMPERATURE UNIT F

DEPTH UNIT ft

TEMPERATURE SOURCE NMEA

DEPTH SOURCE NMEA

RESET TRIP LOG

NO

GENERAL SETUP1

EDIT

NEXT

PAGE

RETURN

General setup menu, page 1

3.Use the cursor pad to select RESET TRIP LOG and press the EDIT soft key.

4.Use the cursor pad to select YES.

5.Press the ENTER soft key.

6.Press the [MENU] key to close the menu.

3-60