Furuno 1762 Keyboard, remote controller test, Screen for testing keyboard, remote controller

7. MAINTENANCE, TROUBLESHOOTING

7.5.3Keyboard, remote controller test

The keyboard test checks the controls on the display unit and remote controller for proper operation.

1.Press the [MENU] key to show the menu.

2.Press the SYSTEM CONFIGURATION soft key.

3.Press the SYSTEM SETUP soft key.

4.Press the TEST & CLEAR soft key.

5.Press the KEYBOARD & REMOTE TEST soft key.

For Remote Controller

PUSH "CLEAR" KEY

3 TIMES TO RETURN

K-BOARD

TEST

I/R REMOTE CODE

For Display Unit

Screen for testing keyboard, remote controller

6.Operate each control on the keyboard and remote controller one by one. A key is functioning properly if its on-screen location “fills” in black (color model) or green (monochrome model) when the key is pressed. For the [ENTER] knob, rotate it to show X-Y position; push it to confirm function.

7.Press the [CLEAR] key on the display unit three times to escape from the test.

8.Press the [MENU] key to close the menu.

7-11