2. RADAR OPERATION

7.Press the [MENU] key to close the menu. An acquisition area of 2.0 to 2.5 miles in range and ±45º on either side of the heading line in bearing appears.

Note: Targets being tracked in automatic acquisition are continuously tracked when switching to manual acquisition.

Automatic acquisition area

45° port

2.0 - 2.5 nm

45° starboard

Automatic acquisition area

2.25.3Displaying target number (internal, external ARP)

Target number can be shown for ARP and TTM targets as below.

ARP

Target

Number

.250/

.125nm

319.9

° T

TARGET

SP

 

 

 

H-UP

TRAIL

TLL

OUTPUT

01

ACQ

TARGET

INFO

RETURN

+359.9° R 0.240nm

ARP target number

1.Press the [MENU] key.

2.Press the ARP SETUP soft key.

3.Select TARGET ID NUMBER.

4.Press the EDIT soft key.

5.Select ON or OFF (default setting) as appropriate.

6.Press the ENTER soft key.

7.Press the [MENU] key to close the menu.

2-37

Page 71
Image 71
Furuno 1742, 1753C, 1733C Displaying target number internal, external ARP, Automatic acquisition area, ARP target number