Furuno 1742C, 1753C, 1733C, 1752 How the anchor watch alarm works, Anchor watch alarm window

3. PLOTTER OPERATION

3.11.3Anchor watch alarm

The anchor watch alarm informs you that your boat is moving when it should be at rest. When the anchor watch is active, a dashed circle (red on the MODEL1722C/1723C series) with an “X” at its center marks the anchor watch area.

Alarm setting

Your ship's position where
you start the anchor watch	: Alarm
alarm.	area

How the anchor watch alarm works

1.Press the [ALARM] key to open the alarm menu.

2.Use the cursor pad to select ANCHOR WATCH ALARM.

3.Press the EDIT soft key to open the anchor alarm window.

ANCHOR WATCH ALARM

▲°

§ON 0.050nm

OFF

▼

Anchor watch alarm window

4.Use the cursor pad to select ON.

5.Use the cursor pad and [ENTER] knob to enter alarm range: Use ◄ or ► to select digit; rotate the [ENTER] knob to set value. The available anchor watch range is 0.001 to 9.999 miles.

6.Press the ENTER soft key or push the [ENTER] knob to register setting.

7.Press the [ALARM] key to close the menu.

3-55